What Is ParkView Backup Camera Delay? Should You Enable It?

ParkView backup camera assists drivers in parking their cars correctly without any collisions or damage. You can view the rear section of your car easily without turning your head to see if there’s any obstacle. Among many features, ParkView backup camera delay is a feature that enhances your ability to park in tight spaces. But not many people know that. So, if you’re confused about the nature or function of this feature, then read the article below.

ParkView Backup Camera Delay
ParkView Backup Camera Delay | Image Courtesy: HardReset_info CARs

I’ll explain in detail what the ParkView backup camera delay feature is. Which benefits and drawbacks does it have? Should you enable it or not? Everything will be covered here. Let’s get to it.

What is a ParkView Backup Camera?

ParkView backup camera, or rearview camera, or simply backup camera, helps you in parking your car the most. It comes on when you put your car in reverse, and lets you see the back of your car. It helps you to park in tight corners and parallel parking scenarios.

You have the option to see directly what’s behind your car or you can have assistance guidelines. These guidelines indicate how wide your car is and how far you can go.

The backup camera works independently or with other assistance features, like park assist systems, to help you reverse and do parking maneuvers. 

When you put your car in reverse, the back of your car is displayed on your entertainment display with a warning message that says “Check Entire Surroundings”. The message disappears after 5 seconds. 

The ParkView backup camera is typically placed on the tailgate handle. If you remove the tailgate, the backup camera system will be unavailable.

What Does the ParkView Backup Camera Delay Mean?

The ParkView backup camera display turns off when you switch to drive mode. Then you can use your infotainment display for other purposes. If you want your backup camera display to show you what’s behind you for some time even after you go into drive mode, you can make it happen. You don’t have to do anything. You just have to turn on a feature that makes it possible to do it. This feature is called ParkView backup camera delay.

If the ParkView backup camera delay is turned off, the backup camera display turns off and the previous display appears as soon as you come out of reverse.

But if you turn on the ParkView backup camera delay, the backup camera display stays on for a maximum of 10 seconds after you shift into drive mode. However, the backup camera display will switch quickly if you 

  • Go faster than 8 mph or 13 km/h
  • Shift into park mode
  • Turn off the engine
  • Touch the ‘X’ button on the display

The ‘X’ button only appears when you’re not in reverse.

How Do You Enable or Disable the ParkView Backup Camera Delay?

To enable the feature, go to the screen that displays the menu. Then go to Settings. The settings menu is different from model to model. But in most cases, you’ll find the ParkView backup camera delay feature in the safety and drive assistance menu. Scroll up or down to find it. Then touch the box beside it so that a tick mark appears. Now it is enabled. It’ll add a slight pause to the backup camera display when you shift back to drive.

To confirm it, shift to reverse. Then go back to drive mode. The backup display will stay on for a few seconds. 

If you want to disable the feature, you do the same thing. When you find the ParkView backup camera delay option, touch the box beside it so that the tick mark disappears. Now it is disabled. Your backup camera display will switch right away when you come out of reverse.

parkview backup camera delay advantage
Image Courtesy: Dan Ezersky

What are the Advantages of ParkView Backup Camera Delay?

The ParkView backup camera delay has many advantages for the drivers. It enhances the general advantage of having a backup camera. 

Simplifies Parking

The backup camera starts sending signals to the backup display when you put the car in reverse and stops immediately when you shift back to drive. But watching what’s behind you only for a few seconds helps you immensely to avoid collisions. 

When you do something like parallel park in a narrow spot, you need to go back and forth a couple of times, and your backup camera turns on and off during that time.

But if you keep the ParkView backup camera delay mode on, you don’t have to turn your backup camera on and off for that. The backup camera stays on for a little while, which is excellent for parking.

Helps Towing a Load

If you tow something with your car, the ParkView backup camera delay mode comes in handy. When you are pulling away, you can see for the last time if everything is okay.

Helps Avoid Collision

For many people, reversing is an easy task. But for others and newbies, it may not seem so easy. People get into accidents and collisions while trying to reverse. 

When you constantly bump into cars and objects, your car will keep going to the workshop. 

But with the ParkView backup camera in delay mode, you can prevent that from happening. You can also prevent other drivers from bumping into your car.  

You can save quite some money that would have gone into new parts and labor costs. You also save on insurance premiums. 

What are the Disadvantages of ParkView Backup Camera Delay?

Distraction

When you are driving, you need to observe the road ahead of you. When the backup camera display stays on because of the ParkView backup camera delay mode, some drivers find it distracting. That’s why it deactivates when you go faster than 8 mph. 

You can solve this issue by having the image integrated into your rearview mirror instead of your infotainment display, so that you can concentrate on the road ahead of you. In fact, most modern cars do so.

Annoying

Because of the ParkView backup camera delay mode, the backup camera display stays on for a maximum of 10 seconds. Some drivers find it annoying. They feel there’s no need for it. You can disable it if you share the same sentiment.

Things to Keep in Mind When Using the ParkView Backup Camera

When using the backup camera, you should exercise caution. Always check what’s behind you. See for yourself if there’s a car, animal, passerby, or any other blind spot. For your safety, don’t entirely rely on the backup camera.

Use the ParkView camera system only for parking. Because it can’t show all the obstructions on your driving path.

When you are backing up using the ParkView backup camera, do it slowly. so that you have sufficient time to stop if something unexpectedly approaches from behind you. Because of the reduced frame rate, you might not see the upcoming object if you go too fast.

Make sure there’s no obstacle in front of the backup camera lens. Always clean the lens when it gets dirty. Be cautious when attempting to clean the lens to avoid damaging it. 

Read More: Can You Add Remote Proximity Keyless Entry To A Jeep?

Final Words

The ParkView backup camera delay mode is a handy feature. It helps you in many ways, especially while parking. It also reduces the chance of collisions and accidents. It is a safety feature that most of you should use. We have discussed how you can enable it if you don’t know how. You can disable it as well. We have also covered that. Hopefully, you know everything about the ParkView backup camera delay mode now.

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *